Get the benefits of short circuit management and auto reversing without adding more boosters!

PM42 Quad Power Manager lets you use a single booster and divide its output into 4 power sub-districts for automatic reversing &/or to improve operation by preempting booster shutdown when a short circuit is detected by the PM42. If you want to improve operation but don't need the added power (or expense) of adding a booster, the PM42 is the right answer for you. Each PM42 can run 4 sub-districts off a single booster in any combination of regular sub-districts and auto reversing sub-districts.

Out of Production, replaced by PM74

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer

6 LocoNet Jacks for use with all scales
Reduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive opreration with Digitrax equipment

AR1 Auto Reversing Controller

The easiest way to add automatic reversing to a section of your layout.
* 8 amp Auto-reversing control for a single reversing district.
* Simple to wire.
* Tunable trip current lets you use it on any layout from Z to G.
* AR1 operates with or without LocoNet so, it can be used on non-Digitrax DCC systems, too.

LocoNet DCC Auto-Reverser with Detection, Transponding and Power Management

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet.  The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.

• Automatic reversing for one reversing section or sub-district.
• DCC Occupancy Detection for 1 Auto-Reversing Section letting you know when equipped rolling stock is in a detection section on your layout.
• Integrated Transponding Zone lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent Automatic short-circuit and over-current  power management, improves reliability by avoiding most booster shutdowns.

• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
• Detects most powered locomotives in a Detection Section.
• Detects rolling stock equipped with resistor wheel sets.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Plug and Play with Digitrax DCC systems.
• LED indication of Detection Section occupancy, Transponding, power status, and reversing section status. 
• Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

For use with Digitrax Decoders Equipped with 6 pin Function Harness

The PX108 series power extender offers the same great features of other Digitrax Power extenders. The PX108 is offered in a shorter package while still providing approximately 70% of the holdup of the larger PX112. Additionally, the PX108 is operational at a wider range of voltages, from 10v to 18v. The PX108 measures 1.007” x 0.492” x 0.299” (25.6mm x 12.5mm x 7.6mm) excluding the harness.

• Keeps locos running during intermittent power interruptions resulting from dirty or bad track.
• 0.33 F Capacitance
• Use on 10-18V Track Power
• Hold up time varies based on actual decoder load & track conditions.
• For use with Digitrax 1 Amp Series 6 decoders.
• Plug N’ Play installation with no CV configuration required.

DCS52 Zephyr Express

All-in-one command station/booster/throttle

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price. It offers simplified advanced train operation for any size layout and is fully expandable. You won’t have to start over when you want to do more with your railroad.

• 3.0 Amp LocoNet Command Station, Booster, and Throttle
• Color 2.4” LCD Display Screen
• Large Backlit Keypad
• Runs up to 20 loco addresses and throttles
• Control lights and sound with 29 functions (F0-F28)
• Integrated USB computer interface
• Simple to set-up with easy to read display
• 13.8 volt output for safe use in N and HO scales
• 2 Jump ports let you use DC power packs as additional DCC throttles
• Fully Expandable, LocoNet System

Comes Complete with DCS53 Command Station, PS314 Power Supply, LT1 Decoder Tester and LocoNet Cable, System Reference Manual and Decoder Manual.

DB210-OPTO Single 3/5/8 Amp AutoReversing DCC Booster that is Opto-Isolated for layouts with common rail wiring.

• Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)
• Up to 8 Amps of power total
• Opto-Isolated for layouts with common rail wiring
• N, HO, & Large Scale Operations with Custom Voltage Trim
• LocoNet for easy plug ‘n play installation and system expansion
• Easy dip switch setup
• Auto resetting over temperature and short circuit protection
• Track status indicators
• Stabilized track drive output
• Over-voltage protected
• Auto-Shutdown when command control signal is lost to prevent “runaway” trains
• IPL updatable

DB210-OPTO Single 3/5/8 Amp AutoReversing DCC Booster that is Opto-Isolated for layouts with common rail wiring.

• Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)
• Up to 8 Amps of power total
• N, HO, & Large Scale Operations with Custom Voltage Trim
• LocoNet for easy plug ‘n play installation and system expansion
• Easy dip switch setup
• Auto resetting over temperature and short circuit protection
• Track status indicators
• Stabilized track drive output
• Over-voltage protected
• Auto-Shutdown when command control signal is lost to prevent “runaway” trains
• IPL updatable

DB220 Dual 3/5/8 Amp AutoReversing DCC Booster

• Dual 3/5/8 Amp AutoReversing DCC Booster
• Up to 16 Amps of power total
• N, HO, & Large Scale Operations with Custom Voltage Trim
• LocoNet for easy plug ‘n play installation and system expansion
• Easy dip switch setup
• Auto resetting over temperature and short circuit protection
• Track status indicators
• Stabilized track drive output
• Over-voltage protected
• Auto-Shutdown when command control signal is lost to prevent “runaway” trains
• IPL updatable

Booster Terminal Plug

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and Boosters

Warranty coverage for this part is 90 days materials and workmanship only.