Occupancy Detector

* Cost Effective LocoNet Advanced Occupancy Detection
* BDL168 LocoNet Universal Occupancy Detector for 16 detection sections.
* Complete LocoNet Occupancy detection (with NO DS54 required). Gives you local occupancy & zone power status reporting via fascia mounted LEDs &/or computer.
* Use BDL168 to enable operations mode read back for decoders equipped with this feature.
* less than $10 per detection section!

BD4 Quad Occupancy Detector

ONLY AS STOCK LAST, OOP

- Cost Effective occupancy detection for 4 detection sections
- Outputs for panel mounted LEDs to display occupancy
- Detects any powered locomotive
- Detects un-powered rolling stock equipped with resistor wheel sets
- Transmits occupancy information to your LocoNet System using DS64 or SE8C (sold separately).

BXP88 LocoNet Occupancy Detector, 8 Detection Sections with Transponding and Power Management.

BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring!

• DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
• One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent  Automatic  short-circuit and over-current  power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns.
• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.

• Detects any powered locomotives in a Detection Section.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Detects rolling stock equipped with resistor wheel sets.
• Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
• LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• 3 Amp capacity per Detection Section , 8 Amp total unit capacity.
• Automatically updates status at track power on.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

LocoNet DCC Auto-Reverser with Detection, Transponding and Power Management

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet.  The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.

• Automatic reversing for one reversing section or sub-district.
• DCC Occupancy Detection for 1 Auto-Reversing Section letting you know when equipped rolling stock is in a detection section on your layout.
• Integrated Transponding Zone lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent Automatic short-circuit and over-current  power management, improves reliability by avoiding most booster shutdowns.

• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
• Detects most powered locomotives in a Detection Section.
• Detects rolling stock equipped with resistor wheel sets.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Plug and Play with Digitrax DCC systems.
• LED indication of Detection Section occupancy, Transponding, power status, and reversing section status. 
• Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

RD2 Remote Sensing Diodes for BDL16 series occupancy detectors

Remote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and remotely located track sections.