Block Detector für 16 Blöcke und 2 RX4-Anschlüsse für 8 Transponding Sektionen.
Handbch in englisch!

RX4 4-ZoneTransponding Receiver Add-on for BDL Series Detectors

4 Zone Transponding Receiver. Add-on for BDL16 series occupancy detectors. Use up to two RX4s with a BDL168 to add transponding to any 8 detection sections on your layout. Use one RX4 with a BDL162 or BDL16 to add transponding to any 4 detection sections on your layout. (Note: BDL16 & BDL162 are discontinued).

Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.

Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that you desire and place the signal connectors at the locations where you will install signals. All the signals are carried neatly in the ribbon cable so you can avoid a “bird’s nest” under your layout.

Terminal Strip Mounting Kit
Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided.

Signal Mounting Hardware Kit
Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals.

SMBK Signal Mast Base Kit

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts. Making these circuit boards look like signals is easy, just paint the mast silver and the heads black (be sure not to cover the LED with paint), then add targets and hoods for a reasonable facsimile of a signal. Another option is to cut off the circuit board mast from the base and attach a signal from another manufacturer.

Picture 2:
Use signals made by any manufacturer by attaching them to the Signal Mast Base kit. Then just plug 'em in !!

Block Detector für 4 Blöcke. Anschluss an DS64 oder SE8.
Handbch in englisch!

NUR SOLANGE VORRAT REICHT, WERKSEITIG AUSVERKAUFT

- Cost Effective occupancy detection for 4 detection sections
- Outputs for panel mounted LEDs to display occupancy
- Detects any powered locomotive
- Detects un-powered rolling stock equipped with resistor wheel sets
- Transmits occupancy information to your LocoNet System using DS54 or SE8C (sold separately).

Block Detector für 8 Blöcke, Transponding und Strom Management..
Handbuch in englisch!

BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring!

• DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
• One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent  Automatic  short-circuit and over-current  power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns.
• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.

• Detects any powered locomotives in a Detection Section.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Detects rolling stock equipped with resistor wheel sets.
• Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
• LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• 3 Amp capacity per Detection Section , 8 Amp total unit capacity.
• Automatically updates status at track power on.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

LocoNet DCC Auto-Reverser mit Detection, Transponding und Power Management

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet.  The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.

• Automatic reversing for one reversing section or sub-district.
• DCC Occupancy Detection for 1 Auto-Reversing Section letting you know when equipped rolling stock is in a detection section on your layout.
• Integrated Transponding Zone lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent Automatic short-circuit and over-current  power management, improves reliability by avoiding most booster shutdowns.

• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
• Detects most powered locomotives in a Detection Section.
• Detects rolling stock equipped with resistor wheel sets.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Plug and Play with Digitrax DCC systems.
• LED indication of Detection Section occupancy, Transponding, power status, and reversing section status. 
• Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

Handbch in englisch!

RD2 Remote Diode für BDL16 Serie Präsenzmelder.

Erkundung von 2 Detektionsbereichen. Keine dicken Kabelstränge zwischen BDL168, 
BDL16 und BDL162 und entfernt angeordneten Gleisabschnitten erforderlich.

Handbch in englisch!