Block Detector für 16 Blöcke und 2 RX4-Anschlüsse für 8 Transponding Sektionen.
Handbch in englisch!

DM-1 DC Motor Adapter

The DM-1 is an inline adapter designed to modify any DS54 output to provide the bi-polar drive current needed to run reversible DC motors, solenoid switches (like Kato & LGB turnouts), lamps and other similar devices that draw up to 1/2 amp.
Just plug the DM-1 into any DS54 output and the DM-1 socket will provide a bipolar drive rated at 500MA continuous and 1 amp surge.

Der DS51K1 ist für eine einzelne Kato Unitrak Weiche.
* einfache Handhabung
* kostengünstige Steuerung einer Kato Unitrak Weiche oder eines ähnlichen Artikels
* 0,5 Amp. für H0 oder N Spur
* kleine Größe 8.11mm x 12.94mm x 3.88mm
Handbuch in Englisch!

Block Detector für 4 Blöcke. Anschluss an DS64 oder SE8.
Handbch in englisch!

NUR SOLANGE VORRAT REICHT, WERKSEITIG AUSVERKAUFT

- Cost Effective occupancy detection for 4 detection sections
- Outputs for panel mounted LEDs to display occupancy
- Detects any powered locomotive
- Detects un-powered rolling stock equipped with resistor wheel sets
- Transmits occupancy information to your LocoNet System using DS54 or SE8C (sold separately).

TF4 Quad DCC Function Decoder with Integrated Transponder

• Four 125mA (250mA peak) function output for lights or other functions

• Functions can be turned on/off using F0-F12

• Supports both 2 digit and 4 digit addressing

• Programmable from DCC compatible equipment

• Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc. on the yellow and white leads

• Standard On/Off Function operation available on green & violet leads.

• Compatible with Digitrax DCC Transponding Systems

• Approximate size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)

Block Detector für 8 Blöcke, Transponding und Strom Management..
Handbuch in englisch!

BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring!

• DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
• One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent  Automatic  short-circuit and over-current  power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns.
• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.

• Detects any powered locomotives in a Detection Section.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Detects rolling stock equipped with resistor wheel sets.
• Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
• LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• 3 Amp capacity per Detection Section , 8 Amp total unit capacity.
• Automatically updates status at track power on.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

LocoNet DCC Auto-Reverser mit Detection, Transponding und Power Management

The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet.  The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.

• Automatic reversing for one reversing section or sub-district.
• DCC Occupancy Detection for 1 Auto-Reversing Section letting you know when equipped rolling stock is in a detection section on your layout.
• Integrated Transponding Zone lets you know the location of transponder-equipped locos or rolling stock.
• Intelligent Automatic short-circuit and over-current  power management, improves reliability by avoiding most booster shutdowns.

• Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
• Detects most powered locomotives in a Detection Section.
• Detects rolling stock equipped with resistor wheel sets.
• Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
• Plug and Play with Digitrax DCC systems.
• LED indication of Detection Section occupancy, Transponding, power status, and reversing section status. 
• Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
• Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
• Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
• Firmware update capability via IPL over LocoNet.

Handbch in englisch!

RD2 Remote Diode für BDL16 Serie Präsenzmelder.

Erkundung von 2 Detektionsbereichen. Keine dicken Kabelstränge zwischen BDL168, 
BDL16 und BDL162 und entfernt angeordneten Gleisabschnitten erforderlich.

Handbch in englisch!

Kostengünstige, hochempfindliche DCC-Blockbelegungserkennung.
Auslöseschwelle des einstellbaren Widerstands- / Stromerkennungsabschnitts (DS).
8A Kapazität, geeignet für alle Spurweiten und Schienenverdrahtungskonfigurationen.
Geräuschresistent und kompatibel mit BDL168-Abschnitten.

Anleitung in englisch.

On-Board-Status-LEDs für Standalone-Erkennung und Gleisstromanzeige, erweiterbar für optionale 
LT5- oder an der Blende montierte Belegungsanzeige-LEDs.
Plug-and-Play-Verbindungen zur Vereinfachung der Einrichtung. Kann Booster-Drähte kaskadieren.
Ausgangssignalleitungen mit isolierter Belegung können die meisten gängigen Signalsysteme oder 
Steuerschnittstellen ansteuern.
Kompatibel mit DS64- und SE8-Modulen zur Signalisierung, Steuerung und Meldung der Belegung 
an LocoNet.
Ersetzt den BD4.

Der DS74 ermöglicht die Weichen-Steuerunge durch jedes DCC-System. 4 Weichen können je DS74 angeschlossen werden. Der Typ der Weichen (mit oder ohne lngsamen Motorantrieb) kann eingestellt werden. Ausserdem sind Anschlüsse für analoge Weichenschaltung vorhanden.
Handbuch in Englisch!

• Quad switch decoder for Solenoid or Slow-motion turnouts.
• Configurable for Capacitive Discharge with balky solenoids.
• Configurable for on/off control of 8 layout lights.
• Plug and play wire connectorization.
• Works with compatible LocoNet Systems.
• Stabilized and adjustable output voltages.
• Option setup switches for configuration.
• On-layout programmability via LocoNet.

• 8 onboard Routes, with EZ-Route setup.
• Routes directly editable using latest DT602 IPL.
• 8 input lines for Switch and Detection inputs.
• Field firmware update via IPL over LocoNet.
• DC 2mm jack for reliable power input.
• Optional DCC track inputs for limited feature capabilities.